*Patent Pending

Make bundle routing easier with ARC by Eurotech

ARC by Eurotech is an innovative adhesive based harness/bundle routing device. ARC routes and secures cables, harnesses and tubes and reduces sheet metal holes and edge clips during vehicle manufacturing. It attaches itself to bundle and is secured with a super strong adhesive for permanent fixation to many surfaces. It’s made of a composite material that resists stretching and tearing, while providing superior strength. ARC can be called out by harness designers before application and it has a near zero profile. For more information and a sample of ARC, contact us below:

Get a sample of ARC: Fill out the form below and include information about your application, and we will send you some trial ARC units for your evaluation. You can also ask about our desktop ARC display board.

7 + 2 =

How ARC Works: ARC Installation to Bundle

Step 1: Place ARC beneath harness, with adhesive side down.

Step 2: Wrap tapered end around harness and fully insert into V-Slot.

Step 3: Pull both sides in opposing directions until neck properly seats in H-Slot.

Step 4: Rotate ARC to proper position on harness bundle, and pull snug.

How ARC Works: ARC Installation to Routing Surface

Step 5: With ARC properly positioned on bundle, remove liner from slotted end and affix adhesive to routing surface, applying firm pressure to entire adhesive area.

Step 6: Remove liner from tapered end.

Step 7: Pull tapered end firmly to ensure ARC is tight around bundle, and affix adhesive to routing surface, applying firm pressure to entire adhesive area.

Size information (All dimensions in mm)

Pin It on Pinterest

Share This